Laminate and linoleum worktops: how to choose the worktop to match your cabinet fronts

The countertop is the most used surface in a kitchen. It is cut on, leaned on, cleaned, and used again several times a day, and it also occupies a very visible place in the overall design.

CUBRO manufactures its own countertops in two finishes: laminate and linoleum. They are the same materials as the fronts of the LAMINATE and LINOLIUM ranges, so the countertop can match the rest of the kitchen or contrast with it.

 

What are CUBRO countertops like?

CUBRO worktops are made on a birch plywood base, which gives them stability and strength. Their daily performance depends on the surface finish: laminate or linoleum.

A worktop can include a sink and taps, a hob and electrical outlets. It can also have a worktop splashback, the vertical panel on the wall that protects against splashes and makes cleaning easier. It can be made of the same material as the worktop or combined with tiles or another cladding. Between the worktop and the wall goes the coving, a finishing piece that absorbs small irregularities and improves watertightness.

Laminated countertop: everyday use with low maintenance

It is the same laminate as the fronts: ultra-matte, with a compact and non-porous surface. It repels dirt, does not retain fingerprints, and is cleaned with a microfiber cloth and warm water.

It is advisable to avoid highly aggressive or abrasive products, which can leave a film or an uneven shine on a matte surface.

It is a good option when the kitchen is used frequently and easy maintenance is desired. It is also the easiest to integrate with laminate fronts, as they share the same finish and characteristics.

Linoleum countertop: warm matte finish and specific care

Linoleum has a slightly warm feel and a very consistent matte finish. On a countertop, that softness is noticeable every time you rest your hand on it. Its palette, featuring earthy tones, muted greens, and grayish blues, allows you to make the countertop and fronts in the same color or play with two shades from the same family.

It requires a little extra care:

  • Heat: hot containers should not be placed directly on it. It is best to always use a trivet.
  • Cleaning: it is cleaned with a specific linoleum soap.
  • Annual treatment: it is recommended to apply it to preserve the appearance of the material.

It works well in kitchens with normal domestic use, for those who prefer a material with an organic feel and color.

One rule for both: do not cut on the surface

On no countertop, whether laminate or linoleum, should you cut directly on the material. A cutting board protects the surface and prevents marks.

How they are installed: they arrive oversized

CUBRO countertops are delivered slightly larger than the opening and are fitted on site. This allows them to adapt to the actual dimensions of the kitchen and any deviations in the walls, which is very common in apartments with out-of-square walls.

This fitting allows for a tighter joint with the wall and cleaner seams and finishes.

Matching the fronts or contrasting with them

There are two ways to approach the countertop in relation to the fronts.

Matching. Fronts and countertop in the same material and color provide visual continuity: fewer cuts in the overall look and a kitchen that appears as a single block. This is a common choice for small kitchens or those open to the living room.

Contrasting. Countertop and fronts in different materials or shades define the work area and add depth. A dark linoleum front with a light laminate countertop, for example, visually separates the two planes without adding a third material.

Both options work. It depends on what you want to stand out: the overall look or the work surface.

When to consider other options: porcelain, quartz, and stone

CUBRO also works with porcelain, quartz, and natural stone worktops, manufactured by specialist suppliers. They are chosen above all when maximum resistance to heat and scratching is sought, or a mineral aesthetic, marble- or cement-like.

Porcelain is the only one of all the materials on which very hot containers can be placed without worry. The process also changes: first the cabinets are assembled, then the stone mason measures in the kitchen itself and the worktop is manufactured with those measurements. It is installed about a week later.

How to choose

Three questions guide the decision:

  • How much heat will it receive? With normal domestic use, laminate and linoleum work well. If you want to place very hot containers without thinking, the option is porcelain.
  • How much maintenance do you want to take on? Minimum: laminate. With specific care in exchange for a feel and color of its own: linoleum.
  • What do you want it to convey? Uniform and technical surface: laminate. Warm and organic matte: linoleum.